





|

Magnetic Couplings
& Clutches
|
 |
MKD
Permanent-Magnet Synchronous Couplings - Collet Type
MKD series
clutches transmit
torque from 10 lb-in (1.2 Nm) to
2655 lb-in (300 Nm) on shafts from 0.125" (3 mm) to 1.575" (40 mm).
Following an overload, the clutch disengages and slips. This
reduces the risk of damage to connected equipment. |
MDC
Permanent-Magnet Synchronous Couplings - Disc Type
MDC series
clutches transmit
torque from 18 lb-in (2 Nm) to
265 lb-in (30 Nm) on shafts from 0.25" (6 mm) to 1.125"
(28 mm).
Following an overload, these clutches disengage and slip, even when
used with a barrier, thus reducing the risk of damage to connected equipment. |
MSV
Permanent-Magnet Synchronous Couplings - Cylindrical Type
MSV series
clutches transmit
torque from 443 lb-in (50 Nm) to
8851 lb-in (1000 Nm) on shafts from 0.75" (20 mm) to 2.6"
(65 mm). These barrier-type clutches -- which can be hermetically
sealed -- slip when overloaded, thus reducing the risk to
connected chemical pumps or other equipment. |
Hysteresis Magnetic Clutches
These maintenance-free magnetic safety clutches are designed as two parts that nestle
together, but without physical contact. The clutches are available in shaft-to-shaft,
disk or shaft-flange styles.
Hysteresis clutches offer extremely smooth constant torque, available over the
motors entire speed range. The torque is produced by the magnetic field across the
air gap between the two sections of the clutch. In case of overload, hysteresis magnetic
clutches disengage without the abrasion and jerks that limit the wear life of
conventional mechanical-type clutches.
HKD Permanent-Magnet Hysteresis Couplings
- Collet Type
HKD series clutches transmit torque from 0.9 lb-in (0.1 Nm) to
80 lb-in (9.0 Nm) on shafts from 0.125" (3 mm) to 1.575" (40
mm). Following an overload, the torque transmitted remains at the rated
torque level. The overload energy is converted into heat which is safely
dissipated.
|
HSV Permanent-Magnet Hysteresis Clutches -
Flange Type
**Special** HSV Bottle Capping Clutch -
Flange Type
HSV series clutches transmit torque from 0.9 lb-in (0.1 Nm) to
36 lb-in (4.0 Nm). These special clutches are ideal for applications
such as bottle capping, unwind/rewind, brakes, and test equipment that
require constant slipping with some torque.
|
For
dimensions and technical ratings, and/or mounting instructions,
follow the hyperlinks above or use the pull-down menu at the top
of the page.
If youre not sure which product type best suits your unique
application, try our online selection
guide, or feel
free to contact our technical experts for assistance by filling
out our application assistance/inquiry
form.
Custom Products
DMM/C Slide Bearing Clutches
DMM/L Roll Bearing Clutches
MKS Special Magnetic Clutches with Increased Air Gap
To find out if these custom-designed clutches are right for your project, please tell us
about your application by completing our application
assistance/inquiry form.
|
About
Rimtec | Press
Release | Products | Selection
Guide
Ordering | Shows
| Contact Us
| Terms and Conditions | Home
Copyright © 1999-2004
Rimtec Corporation, 211 S. Lombard Road, Addison, IL 60101
Toll Free: 877-4RIMTEC (877-474-6832) ~ Phone: 630-628-0036
Fax: 630-628-0041 ~ Email: info@RimtecCorporation.com
Comments, questions or problems with our website? Please contact our webmaster.
|